Description

HI-PROHEAT is an ultra high solids, fast curing, technologically advanced all-purpose heat-resistant coating.

USES

• Concrete, wood, fiber or Metal surfaces.
• Commercial and residential roofs
• Water tanks, Storage Tanks
• Sumps and trenches
• Cold storages

ADVANTAGES

• Excellent adhesion
• Excellent UV resistant.
• High-temperature stability
• Thermal and mechanical shock resistance
• Abrasion and impact resistance – Excellent flexibility
• Easy applicable and Eco-friendly.

PACKING

HI PROHEAT is packed in 1 kg, 5kg, and 20kg Plastic Containers.

COVERAGE

Depending on the porosity of surface 1 lt Approximately 30 Sq. Ft.s / Kg./ coat

on a reasonably smooth masonry surface

TECHNICAL DATA

Color                             :  white

Form                             :  R.F.U

Specific Gravity          :  1.05

Appln. Temp               :  >5º C

Service Temp              :  20ºC – 55ºC

Foot Traffic                 : 6 hrs   @20 ºC & 4 hrs    @40 ºC

APPLICATION

Surface Preparation: The surface must be clean, sound, dry and free from oil, grease, laitance and any loose particles to ensure good Adhesion. The surface should be satisfied, level and all defects repaired. Concrete and Cementitious substrates should be at least 21 days old.

Cracks up to 5mm width fill with HI-SEAL or Hi-Fix modified mortar in case of more than 5mm cracks on cementitious substrates.

Priming: Where necessary to seal off dust and cohesiveness to improve the substrate, Apply HI-PRIME as a Primer.

Application: Apply two coats of HI-PROHEAT on the properly primed surface, by using a Roller or Brush. Each coat applies with an interval of 2 hrs. On metal surfaces, prime the surface with Anti-Corrosive primer.

LIMITATIONS

Do not apply HI-PROHEAT at temperatures below 5ºC or to be a frozen substrate.

STORAGE & SHELF LIFE

Shelf life in unopened, undamaged packaging is approx. 6 months. Store in a dry, frost-free place.