Hydrotite

Description

Hydrodite is a ready to use one component , self Vulcanizing liquid rubber polymer dispersion which dries to form a thin, seamless, load bearing elastomeric waterproof membrane designed for waterproofing wet areas. It is fast drying, breathable, produces a continuous moisture barrier with outstanding adhesion. Easily applied with Brush, Roller, Trowel or Sprayer.

USES

HYDROTITE is used to waterproof:

• Interior and Exterior
• Walls
• Balconies and Terraces
• Asbestos roofing
• Wet rooms such as Shower areas and Shower pans, Bathrooms, Kitchens and Sanitary areas in commercial buildings an Residential homes
• Drains
• Swimming pools ,Foundations and water features
• External coating of walls in Basements, sumps, Subways and Lift wells
• Fast track jobs where time is of essence and areas not requiring intricate waterproofing details

ADVANTAGES

• Convenient – Ready to use, can be easily applied by Brush, Roller Or spray
• Protects substrates from damage by water penetration. Tough,Durable, and excellent adhesion
• superior Flexibility and Elongation
• Excellent Vapor Barrier
• Breathable
• Solvent free- Non toxic and non flammable
• Fast Setting
• Install tile, brick and stone directly onto membrane

PACKING

  HYDROTITE is available in 20kg Plastic Containers Clean tools and equipments with water immediately after use. Cured material can only be removed mechanically. 

LIMITATIONS 

   Do not apply HYDROTITE at temperatures below 5ºC or to be a frozen substrate. Do not use as an adhesive to install ceramic tile or natural stone. Not a sealer for Saw-cut, Control, Construction, cold or Expansion Joints.

 COVERAGE

Approximately 20-30Sq. Ft.s / Kg./@0.5mm wet film thickness/coat on reasonably smooth masonry surfaces.

Technical Data

Colour                                    : White/Green 
Form                                     : R.F.U
Specific Gravity                    : 1.30-1.3530-1.35 
ApplnTemp                           : >5º C 
Service Temp                         : 20ºC – 45ºCC – 45ºC
Max Thickness per coat        : 1 mmmm
Max Thickness of dry film    : 1 mm
Foot Traffic                            : 8 hrs @20 ºC & 6 hrs @40 ºC20 ºC & 6 hrs @40 ºC 
Thermal Resistance               : from -30ºC to +80ºC 
Can be tiled after                   : 24-48h -48h 
Complete setting                    : 7 daysdays

APPLICATION

Surface Preparation: The surface must be clean, sound, dry and free from oil, grease, laitance and any loose particles to ensure good Adhesion. Surface should be scarified , level and all defects repaired. Don’t level with gypsum or asphalt based products. Treat any fungus ( mold and mildew) growth areas. Concrete and cementitious substrates should be at least 21 days old.

Priming: Where necessary to seal of dust and cohesiveness to improve the substrate, Apply HI-PRIME as a Primer. 
After brief stirring , the product is ready for use. Apply Hydrodite on the properly prepared surface , by using a smooth steel trowel, Roller or Brush. The application should be similar to painting – in one direction. Allow this first coat to dry for about 2-4 hours. Apply second coat of the slurry in the direction of right angles of the first coat. When last coat has dried to the touch inspect final surface for pinholes voids thin spots or other defects. Use additional Hydrodite to seal defects overall thickness of the two coats of dry product must be at least 1 mm.

STORAGE & SHELF LIFE

Shelf life in unopened , undamaged packaging is approx. 6 months. Store in a dry, frost-frpee place.

CAUTIONS

Consult MSDS for more safety information. Surface temperature must be >45°F (7°C) during installation and for 24 hours thereafter Protect from traffic or water until fully cured Allow membrane to cure fully (typically 7 days @ 70°F/21°C) before flood testing flood test prior to applying tile or stone. Cold weather will require a longer cure time