HI-FORZA is a mid-range water-reducing admixture for concrete. Its unique formulation is based upon the latest polycarboxylate. HI-FORZA does not contain calcium chloride or any other intentionally-added chlorides and will not contribute to corrosion of steel reinforcement present in the concrete does not contain added Chlorides and will not promote corrosion in steel.
HI-FORZA is recommended for use in :
- Conventional ready-mix concrete.
- Concrete slabs.
- Concrete paving
- Concrete footings.
- Low cement containing concrete of harsh mix designs.
- Medium dosage, cost-effective water reducer.
- Mid-range water-reduction of up to 15%.
- Improves workability and finishing qualities.
- Used with conventional slump concrete.
- Suitable for concrete containing fly ash.
- Ideal for lean, harsh, ready-mix concrete.
HI-FORZA is available in 225 kg HDPE Barrels.
Appearance : Light to pale yellow
Form : Liquid
Solids : 19-22%
Specific Gravity : 1.03 To1.05 @ 20ºC
pH Value : 5-7
Chloride Content : Nil
Dosage : HI-FORZA is an easy to dispense liquid admixture. Dosage rates will vary depending on the material used, ambient conditions and the requirements of a specific project.
Addition rates for HI-FORZA can vary with the type of application, but will normally range from 0.4 – 2.5% by weight of cementitious materials.
Should conditions require using more than the recommended addition rate, please consult your Hi-Bond representative.
Trial mixes should be run to verify plastic and hardened performance with local materials. Over dosage may cause delay in the setting time.
HI-FORZA should be stored at temperatures above 5°C. If frozen, its properties can be recovered after thawing and agitating thoroughly.
1 year in original, unopened container.
During use, avoid contact with the skin and eyes. Wear protective gloves and eye protection when handling the product. In case of contact with the eyes rinse with plenty of fresh water and seek medical advice.