Polycarboxylate Ether HI PCE HR50, WR50 Co-polymer for concrete admixtures use in high-performance concrete. It provides high efficiency at a low dosage and shows the excellent performance of water reducing and slump retention in the concrete of polycarboxylate ether HI PCE HR50, WR50
HI- PCE HR50 is a Polycarboxylate ether for making polycarboxylate based superplasticizers has excellent water reduction, good flow-ability, and High retardation. It shows high efficiency at low dosage rates. It is designed as 50% solid contents for the economical transportation cost saving.
High fluidity at low water levels retain the slump longer time excellent water reducing by dispersing effect low stickiness concrete
High compressive strength by low w/c ratio most cost-effective self-compacting (SCC) concrete applicable for Pre-cast concrete higher durability silica fume concrete cohesive and Monolithic concrete
HI-PCE HR 50 is packed in 225 kg plastic containers.
Color : Pale Color
Form : Liquid
Odor : Characteristic
Contents : 50%
Specific gravity: [email protected]°C
pH Value : 5.0 – 7.5
Chloride : Nil
HI-PCE HR 50 has a recommended dosage range of 0.25 ~ 0.9 litres/100 kgs of binders on a basis of an undiluted solution. It is well soluble in water and we recommend to dilute it as your application. HI PCE HR 50, WR50 and HI PCE WR50 is compatible with Ligno base plasticizer. Do not use blending with Nsfc base superplasticizer.
Stored in tightly sealed containers at room temperature. The shelf life of the properly stored material is one year from the date of manufacture.
- Good workability.
- Improve the concrete strength
- High water-reducing ability
- Decrees bleeding of material separations.
- Reduce slump loss
- Economical Concrete design.
This Product is Formulated and Labeled and Commercial use only For Best Results and Safest Usage, User is Specialty Directed to Consult.